Saw Blades Delta 93-1/2 In. X 1/2 In. X 4T Band Saw Blade

Timber Wolf band saw blades run cooler, last longer and track true. Our 1/2 in. x 4 tpi x 0.025 blades are made of Swedish Silicon Steel. The teeth are induction hardened, milled for true tracking and produce a thin kerf. These blades run under a little lower tension which is better for your band saw. Our welds are warranted. The 1/2 in. x 4 tpi blades are generally used for straight-line cutting in 2-1/2 in.-6 in. hardwoods and 1-1/2 in.-4 in. softwoods. This is an excellent resaw blade if you want a little nicer finish than the 3 tpi but material height is limited to 6 in. They can also make a 2-1/2 in. radius (5 in. Dia) cut.

• Milling the teeth of our blades into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth, induction hardening allows for different but more precise hardness throughout the blade, these unique manufacturing techniques along with the use of Swedish Silicon steel and the highest quality alloys set these blades apart from all other wood and metal cutting blades
• World’s only thin kerf, low tensioned, silicon steel band saw blades
• 50% sharper tooth
• Milled teeth not stamped or ground
• Induction hardened versus flame hardened maintains a sharp edge and provides longer life
• Run under low tension requiring less horse power and strain on your band saw
• Because of our deep gullets, we are able to use lower hook angles which generate less heat on the tip of the tooth

 WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov